Analysis of heavy metal and polycyclic aromatic hydrocarbon pollution characteristics of a typical metal rolling industrial site based on data mining.

With the transformation and upgrading of industries, the environmental problems caused by industrial residual contaminated sites are becoming increasingly prominent. Based on actual investigation cases, this study analyzed the soil pollution status of a remaining sites of the copper and zinc rolling industry, and found that the pollutants exceeding the screening values included Cu, Ni, Zn, Pb, total petroleum hydrocarbons and 6 polycyclic aromatic hydrocarbon monomers. Based on traditional analysis methods such as the correlation coefficient and spatial distribution, combined with machine learning methods such as SOM + K-means, it is inferred that the heavy metal Zn/Pb may be mainly related to the production history of zinc rolling. Cu/Ni may be mainly originated from the production history of copper rolling. PAHs are mainly due to the incomplete combustion of fossil fuels in the melting equipment. TPH pollution is speculated to be related to oil leakage during the industrial use period and later period of vehicle parking. The results showed that traditional analysis methods can quickly identify the correlation between site pollutants, while SOM + K-means machine learning methods can further effectively extract complex hidden relationships in data and achieve in-depth mining of site monitoring data.

Experiments and modeling to develop a Pistia stratiotes based Floating Vegetated System (FVS) for the removal of heavy metals (Pb, Zn, Cr, Cu, Ni).

Floating Vegetated System (FVS) emerged as a green and sustainable technology, presenting a viable solution for treating heavy metals (HMs) contaminated water without disrupting the food web. Pistia stratiotes has been used in the design of FVS due to its abundance of aerenchyma tissues, which contribute to its ability to remain buoyant. FVS exhibited significant HMs removal efficiencies, with Pb top at average 84.4 %, followed by Zn (81.1 %), Cr (78.5 %), Cu (76.5 %) and Ni (73 %). Bio-concentration Factor (BCF) and Translocation Factor (TF) values evaluated the plant's adeptness in metal uptake. For plants treated with Cu, the highest post-treatment chlorophyll content of 9 ± 1 mg.ml-1 was observed while Zn induced plant shows the lowest content of 7.1 ± 0.4 mg.ml-1. Using Box-Behnken Design (BBD), the system achieved 81.48 % Pb removal under optimized conditions such as initial Pb conc. of 9.25 mg. l-1, HRT of 24.49 days and a water depth of 26.52 cm. ANOVA analysis highlighted the significant impact of all the factors such as initial HM conc., HRT and wastewater depth on FVS performance. Kinetic analysis estimated a closer observance to the zero-order model, supported by high determination coefficient (R2) values. In conclusion, the FVS, as one of the most eco-friendly technologies, demonstrates higher potential for treating polluted water bodies, offering a sustainable remedy to global metal pollution challenges. Research on FVS for HMs removal is an area of ongoing interest and there are several potential future studies that could be pursued to further understand and optimize their effectiveness such as optimization of plant species, enhancement of plant-metal interactions, effects of environmental factors, economic feasibility studies, disposal of heavy metals accumulated plant, scale-up and application in real-world settings, etc.

Mechanisms of copper and zinc bioremoval by microalgae and bacteria grown in nutrient rich wastewaters.

Swine farming produces large quantities of nutrient-rich wastewater, which often contains metals such as Cu and Zn, used as feed additives for pigs. These metals must be removed from the wastewater before discharge but their retention in the biomass can limit its subsequent utilization. Photobioreactors are a very promising alternative for swine wastewater treatment, as the consortium of microalgae and bacteria growing symbiotically in these reactors allows high nutrient and metal removal efficiency at moderate costs. This work studies the mechanisms of removal of Cu(II) and Zn(II) by the two types of microorganisms growing in these photobioreactors. A microalga commonly used in wastewater treatment (Scenedesmus almeriensis) and an activated sludge were kept in contact with synthetic wastewater containing 100 mg/L of Cu and Zn. After 72 h, Scenedesmus almeriensis removed 43% of Cu and 45% of Zn, while activated sludge removed 78% of Cu and 96% of Zn. Single and sequential extractions of the biomasses using different extracting reagents revealed that biosorption on protonable groups is the dominant removal mechanisms. Mild reagents solubilized 69% of Cu and 94% of Zn from the microalgae and 76% of Cu and 93% of Zn from the activated sludge. Low metal concentrations in the oxidizable and residual fractions evidenced minimal bioaccumulation inside the cells. FTIR and ESEM-EDX analysis confirmed biosorption by ion exchange and complexation as the main metal remediation mechanisms. The weak bonds of the biosorbed Cu and Zn ions are beneficial for the valorization of biomass and the obtaining of safe bioproducts.

A pyrene-induced PET-based chemosensor for biologically important Zn(II) ions: application in test strips and live cell imaging studies.

Cation and anion sensing is vital owing to their universal dispersion in ecosystems and biological functions. It has been shown that fluorescent receptors based on organic platforms are efficient for detecting a number of ions and have many advantages such as low cost, superior sensitivity and simplicity in installation. This study demonstrates the design and synthesis of a novel receptor (E)-3-[(3,5-di-tert-butyl-2-hydroxybenzylidene)amino]-2-(pyren-1-yl)-2,3-dihydroquinazolin-4(1H)-one (DTQ) for the rapid recognition of Zn(II) ions. DTQ exhibited a significant fluorometric "turn-on" characteristic towards Zn(II) at λmax 444 nm in aqueous acetonitrile by inhibiting the photo-induced electron transfer (PET) and -CN- process. The ESI-MS analysis and Job's plot experimental results confirmed stoichiometric 1 : 1 complex formation between DTQ and Zn(II). Fluorometric investigations revealed the detection limit and association constant of DTQ towards Zn(II), which were found to be 13.4 nM and 1.47 × 105 M-1, respectively. DTQ was employed to sense Zn(II) on low-cost test strips. The present research findings imply that DTQ can function as an effective sensor for Zn(II).

Heavy metal contamination in duck eggs from a mercury mining area, southwestern China.

Objective: Mercury (Hg) contamination in the environment around mercury mines is often accompanied by heavy metal contamination. Methods: Here, we determined concentrations of chromium (Cr), zinc (Zn), strontium (Sr), barium (Ba), and lead (Pb) in duck eggs from a Hg mining area in Southwest China to assess the contamination and health risk. Results: Duck eggs obtained from the mining area exhibit higher concentrations of Cr, Zn, Sr, Ba, and Pb compared to those from the background area, with egg yolks containing higher metal levels than egg whites. Specifically, the mean Cr, Zn, Sr, Ba, and Pb concentrations of duck eggs from the Hg mining area are 0.38, 63.06, 4.86, 10.08, and 0.05 µg/g, respectively, while those from the background area are only 0.21, 24.65, 1.43, 1.05, and 0.01 µg/g. Based on the single-factor contamination index and health risk assessment, heavy metal contamination in duck eggs poses an ecological risk and health risk. Conclusion: This study provides important insight into heavy metal contamination in duck eggs from Hg mining areas.

Nutritional Composition and Antinutritional Factors of Five Wild Edible Fruits Grown in the Mekdela District, South of Wollo, Ethiopia.

This study was carried out to determine the mineral content and nutritional properties of five wild fruits Rhus vulgaris, Rosa abyssinica, Rhus natalensis, Euclea racemosa, and Ficus sur. The proximate composition parameters (moisture, ash, crude fiber, crude fat, and crude protein) and antinutritional factors were evaluated using methods of the Association of Official Analytical Chemists and elemental analysis using the atomic absorption spectroscopy technique. Among the five wild edible fruit species, Rhus vulgaris had the highest carbohydrate content (83.3 ± 0.28 g/100 g) and a high total energy (344.5 ± 2.21 kcal/100 g). Euclea racemosa was found to have the maximum ash content (12.8 ± 0.37 g/100 g), protein content (3.22 ± 0.01 g/100 g), and moisture (16.24 ± 0.003 g/100 g), respectively. Rhus natalensis showed the highest fiber content (9.54 ± 0.003 g/100 g). Mineral analysis showed that local wild fruits contained a considerable amount of minerals. The calcium concentration ranged from 99.51 mg/100 g in Euclea racemosa to 160.12 mg/100 g in Ficus sur. Potassium concentration varied from 54.34 mg/100 g in Euclea racemosa to 234 mg/100 g in Rhus vulgaris. Iron ranges from 21.4 mg/100 g in Rosa abyssinica to 41 mg/100 g in Rhus natalensis, and zinc ranges from 2.3 mg/100 g in Rhus vulgaris to 4.2 mg/100 g in Ficus sur. A high saponin content (2.12 mg/100 g) and a low tannin content (0.23 mg/100 g) were obtained in Rosa abyssinica. The phytate content (1.52 mg/100 g) and the oxalate content (0.9 mg/100 g) were high in Rhus natalensis. In conclusion, the present study shows that wild fruits can be used as food supplementation in food in a safe area.

Trace metals and nutrient analysis of marine fish species from the Gwadar coast.

Trace metals are naturally occurring metals found in very small concentrations in the environment. In the context of fish flesh, metals such as copper, calcium, potassium, sodium, zinc, iron, and manganese are absorbed by fish and play vital roles in various physiological functions. However, if these metals exceed the recommended limits set by WHO/FAO, they are termed 'toxic metals' due to their harmful impacts on both the fish and its consumers. Therefore, the present study aims to analyze the levels of protein, lipids, and certain metals-Aluminum (Al), Sodium (Na), Zinc (Zn), Titanium (Ti), Iron (Fe), Copper (Cu), Potassium (K), and Calcium (Ca) in three commercially important marine fishes i.e. Rastrelliger kanagurta, Sardinella abella, and Otolithes ruber. The study also aims to assess their potential impact on human health. The macro-Kjeldhal method and Soxhlet apparatus were used to estimate protein and lipid contents, while atomic absorption spectroscopy (AAS) was used to estimate trace metals found in fishes. The study found that these fish species are valuable sources of protein, lipids, and certain essential minerals. The protein content (CP) in these three species ranged from 63.35 to 86.57%, while lipid content was from 21.05 to 23.86%. The overall results of the trace metal concentrations analyzed in the present study revealed that Aluminum (Al), Sodium (Na), Zinc (Zn), Titanium (Ti), Copper (Cu), Potassium (K), and Calcium (Ca) were found in low concentration or traces and also within suitable ranges as set by WHO/FAO. However, Iron (Fe) was absent in all three species. Moreover, both copper and potassium were found in all three species, while Zinc was present in Rastrelliger kanagurta and Sardinella abella, calcium in Sardinella abella, and sodium in Otolithes ruber only. Titanium was recorded for the first time in S. abella. However, the total health risk assessment associated with these fish food consumption was measured by THQ and TTHQ and found to be less than 1, which shows no potential risk related to trace metals found in these fishes on human health upon their consumption. In conclusion, these commercially important marine fish species were found valuable sources of protein, lipids, and essential trace minerals that are necessary for human health. Thus, the current study provides useful information for the local population to make informed decisions about their daily diets and highlights the importance of sustainable fishing practices to maintain these valuable marine resources by periodical monitoring of their ecosystem.

Mechanism of zinc stress on magnesium deficiency in rice plants (Oryza sativa L.): Insights from magnesium isotopes.

Magnesium (Mg) and zinc (Zn) are essential nutrients for plants. Mg deficiency often occurs in rice plants grown in Zn-polluted soil. However, the mechanism for this correlation is unclear. Here, we performed culture experiments on rice plants (Oryza sativa L.) and used Mg isotopes to investigate mechanisms of Zn stress on plant Mg deficiency. Our results show that excess Zn can significantly reduce the uptake of Mg in rice tissues. The root displays positive Δ26Mgplant-nutrient values (δ26Mgplant-δ26Mgnutrient; 1.90 ‰ to 2.06 ‰), which suggests that Mg enters the root cells mainly via Mg-specific transporters rather than non-selective diffusion. The decreased Δ26Mgplant-nutrient values with increasing Zn supply can be explained by the competition between Zn and Mg, both of which combine with same transporters in roots. In contrast, the shoots (stem and leaf) display much lower δ26Mg values than roots, which suggests that the transport of Mg from roots to aerial biomass is mainly via free Mg ions, during which Zn cannot competitively inhibit the movement of Mg. Our study suggests that the Mg deficiency in rice plants can be caused by high Zn-levels in soils and highlights the necessity of soil Zn-remediation in solving Mg deficiency problems in rice plants.

Evaluation of urinary trace element levels in patients with opioid use disorder undergoing methadone treatment in western Iran.

The monitoring of essential and toxic elements in patients with Opioid Use Disorder (OUD) undergoing methadone treatment (MT) is important, and there is limited previous research on the urinary levels of these elements in MT patients. Therefore, the present study aimed to analyze certain elements in the context of methadone treatment compared to a healthy group. In this study, patients with opioid use disorder undergoing MT (n = 67) were compared with a healthy group of companions (n = 62) in terms of urinary concentrations of some essential elements (selenium (Se), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), calcium (Ca)) and toxic elements (lead (Pb), cadmium (Cd), arsenic (As), and chromium (Cr)). Urine samples were prepared using the acid digestion method with a mixture of nitric acid and perchloric acid and assessed using the ICP-MS method. Our results showed that the two groups had no significant differences in terms of gender, education level, occupation, and smoking status. Urinary concentrations of Se, Cu, and Fe levels were significantly lower in the MT group compared to the healthy subjects. However, the concentrations of Pb, Cd, As, Mn, Cr, and Ca in the MT group were higher than in the healthy group (p < 0.05). No significant difference was established between the levels of Zn in the two groups (p = 0.232). The results of regression analysis revealed that the differences between the concentration levels of all metals (except Zn) between two groups were still remained significant after adjusting for all variables (p < 0.05). The data obtained in the current study showed lower urinary concentrations of some essential elements and higher levels of some toxic elements in the MT group compared to the healthy subjects. These findings should be incorporated into harm-reduction interventions.

Variations in grain yield and nutrient status of different maize cultivars by application of zinc sulfate.

Although maize is sensitive to zinc (Zn) deficiencies, the responses of maize cultivars to the foliar application of Zn sulfate (ZnSO4) may vary significantly. Here, we quantified the responses of grain yields and nitrogen (N), phosphorus (P), and potassium (K) absorption to ZnSO4 using 22 modern maize cultivars. The results revealed that 40.9% of the cultivars were not affected by foliar ZnSO4, whereas only 45.5% of the cultivars responded positively to ZnSO4, which was evidenced by increased grain numbers and shortened bald tip lengths. The impact of Zn fertilizer might be manifested in the dry biomass, from the 8-leaf stage (BBCH 18). For Zn-deficiency resistant cultivars, the foliar application of ZnSO4 enhanced N accumulation by 44.1%, while it reduced P and K absorption by 13.6% and 23.7%, respectively. For Zn-deficiency sensitive maize cultivars, foliar applied ZnSO4 improved the accumulation of N and K by 27.3% and 25.0%, respectively; however, it lowered their utilization efficiency. Hence, determining the optimized application of Zn fertilizer, while avoiding Zn toxicity, should not be based solely on the level of Zn deficiency in the soil, but also, take into consideration the sensitivity of some cultivars to Zn, Furthermore, the supplementation of Zn-deficiency sensitive maize cultivars with N and K is key to maximizing the benefits of Zn fertilization.

Assessing the health risks of heavy metals and seasonal minerals fluctuations in Camellia sinensis cultivars during their growth seasons.

The risk assessment of heavy metals in tea is extremely imperative for the health of tea consumers. However, the effects of varietal variations and seasonal fluctuations on heavy metals and minerals in tea plants remain unclear. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to evaluate the contents of aluminum (Al), manganese (Mn), magnesium (Mg), boron (B), calcium (Ca), copper (Cu), cobalt (Co), iron (Fe), sodium (Na), zinc (Zn), arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), and antimony (Sb) in the two categories of young leaves (YL) and mature leaves (ML) of tea (Camellia sinensis) cultivars throughout the growing seasons. The results showed significant variations in the contents of the investigated nutrients both among the different cultivars and growing seasons as well. Furthermore, the average concentrations of Al, Mn, Mg, B, Ca, Cu, Co, Fe, Na, Zn, As, Cd, Cr, Ni, and Sb in YL ranged, from 671.58-2209.12, 1260.58-1902.21, 2290.56-2995.36, 91.18-164.68, 821.95-5708.20, 2.55-3.80, 3.96-25.22, 37.95-202.84, 81.79-205.05, 27.10-69.67, 0.028-0.053, 0.065-0.127, 2.40-3.73, 10.57-12.64, 0.11-0.14 mg kg-1, respectively. In ML, the concentrations were 2626.41-7834.60, 3980.82-6473.64, 3335.38-4537.48, 327.33-501.70, 9619.89-13153.68, 4.23-8.18, 17.23-34.20, 329.39-567.19, 145.36-248.69, 40.50-81.42, 0.089-0.169, 0.23-0.27, 5.24-7.89, 18.51-23.97, 0.15-0.19 mg kg-1, respectively. The contents of all analyzed nutrients were found to be higher in ML than in YL. Target hazard quotients (THQ) of As, Cd, Cr, Ni, and Sb, as well as the hazard index (HI), were all less than one, suggesting no risk to human health via tea consumption. This research might provide the groundwork for essential minerals recommendations, as well as a better understanding and management of heavy metal risks in tea.

Concentration of trace elements in blood of Polish patients with prostate cancer.

The goal of the study was to analyse the concentrations of chemical elements (Fe, Ni, As, Cd, Pb, Hg, Cr, Zn) which are important for the determination of environmental toxins (e.g. resulting from smoking, exposure to harmful agents at work) in Polish patients with prostate cancer. The study covered 66 patients with diagnosed prostate cancer and 64 healthy volunteers over 50 years old. The analysis of the concentrations of selected chemical elements in whole blood was performed using inductively coupled plasma mass spectrometry (ICP-MS). In their blood, the patients with cancer had a significantly higher concentration of only one of the examined elements: arsenic. Additionally, the study group had lower concentrations of chromium, zinc, but also cadmium and lead, which are commonly regarded as carcinogenic. Taking into consideration the control group of healthy subjects of this study, we can assume that the subjects with prostate cancer were exposed to higher levels of arsenic, and that exposure to this element may be associated with an increased risk of cancer.

Effects of foliar application of Zn combined with organic matters on Cd accumulation and its chemical forms in rice.

Rice consumption is a key Cd exposure pathway, which poses a health risk to humans. Reducing cadmium (Cd) concentrations in rice remains challenging. In this study, a pot experiment was conducted to examine the effects of foliar spray of Zn combined with organic matters (including Zn-lysine (Zn-Lys), Zn-fulvic acid (Zn-FA), Zn-amino acid (Zn-AA), and Zn combined with glutathione (Zn + GSH)) on Cd accumulation in rice grains. Compared with the control group, all treatment groups exhibited reduced Cd concentration in rice grains, while improving plant growth, and reducing Cd transport from other tissues to the grains. Zn-FA was found to be the most effective fertilizer, which considerably reduced Cd concentrations in grains from 0.77 ± 0.068 to 0.14 ± 0.021 mg/kg and yielded reductions of up to 81%, which is within the Chinese food maximum tolerable limit of 0.2 mg/kg. Furthermore, the analysis of the chemical forms of Cd of rice tissues indicated that the treatment groups had increased proportions of integrated with pectates and protein in the stems. Except for the group treated with Zn-Lys spray, the percentages of undissolved Cd phosphate in the leaves were increased in all treatment groups, which reduced Cd toxicity to rice plants. The foliar application of Zn combined with organic matters may be a promising strategy to decrease Cd concentration in rice grains cultivated in severely Cd-contaminated agricultural soil, particularly in the karst area in southwest China with limited available cultivable agricultural land.

Towards a comprehensive understanding of zinc tolerance in Limonium brasiliense as a useful tool for environmental remediation and monitoring.

Heavy metal pollution is a serious environmental problem worldwide, creating the necessity to find eco-friendly strategies for monitoring and remediating environments. This study aimed to evaluate morphological, physiological, and biochemical responses as indicative of Zn tolerance in Limonium brasiliense and to determine the ability of this halophyte to accumulate different concentrations of Zn (0, 100, and 200 µM) in hydroponic conditions. The leaf shape at high Zn concentration showed enlarged petioles and lanceolate blades, whereas the leaf size was reduced. Water content, chlorophyll fluorescence parameters, and pigment content decreased with Zn addition. Of the antioxidant activities, only APx increased 75% compared to the control by Zn stress. Zn concentration was higher in aerial structures than in roots (BAC> 1 and TF> 1), suggesting that L. brasiliense could function as an accumulator of Zn. Its great ability to resist metal stress and its strong capacity to protect itself against high Zn concentration postulate it as a good phytoremediation of environments enriched with Zn. The study emphasizes using leaf morphology as an early biomonitoring tool for detecting Zn pollution, providing more evidence of their potential use as a biomarker for evaluating and assessing ecosystem health in biomonitoring programs.

On-site extraction using a 3D printed device coated with Zn/Co-ZIF-derived carbon followed by an on-line SIA-HPLC-FL system for fluoroquinolones determination in wastewater.

A 3D printed device covered with Zn/Co-ZIF-derived carbon allows the on-site extraction of fluoroquinolones (FQs) from wastewater, avoiding the sample transportation to the laboratory, and the subsequent elution, separation and determination using an on-line flow system based on sequential injection analysis (SIA) coupled to HPLC-FL. Several parameters that affect the extraction efficiency and desorption were optimized including the sorption phase immobilization technique on the 3D device, extraction time, pH effect, sample volume as well as the type of eluent, eluent volume, and flow rate. Under optimum conditions, detection limits of 3-9 ng L-1 were achieved for norfloxacin, ciprofloxacin, danofloxacin, enrofloxacin and difloxacin. The precision expressed as relative standard deviation (%RSD, n = 3), showed intraday and interday ranges of 1.5-5.3% and 2.8-5.7%, respectively, demonstrating a good precision of the proposed methodology. To assess matrix effects and accuracy of the proposed method in real samples, recovery studies were performed without and with FQs spiked at different concentrations (0.5-10 µg L-1) to wastewater samples, showing good recoveries in the range of 91-104%. The results allow to confirm the applicability of MOF-derived carbons as adsorbents for on-site extraction, and the satisfactory separation and quantification of FQs by a SIA-HPLC-FL on-line system after their desorption with small eluent volumes.

Effect of biochar, zeolite and bentonite on physiological and biochemical parameters and lead and zinc uptake by maize (Zea mays L.) plants grown in contaminated soil.

Heavy metals (HMs) are common contaminants with major concern of severe environmental and health problems. This study evaluated the effects of organo-mineral amendments (mesquite biochar (MB), zeolite (ZL) and bentonite (BN) alone and in combination) applied at different rates to promote the maize (Zea mays L.) growth by providing essential nutrient and improving the soil physio-chemical properties under zinc (Zn) and lead (Pb) contamination. Result revealed that the incorporation of organo-mineral amendments had significantly alleviated Pb and Zn contamination by maize plants and improved the physiological and biochemical attributes of plants. Combined application of organo-mineral amendments including BMA-1, BMA-2 and BMA-3 performed excellently in terms of reducing Pb and Zn concentrations in both leaves (19-60%, 43-75%, respectively) and roots (24-59%, 42-68%, respectively) of maize. The amendments decreased the extractable, reducible, oxidisable and residual fractions of metals in soil and significantly reduced the soil DTPA-extractable Pb and Zn. BMA-1 substantially improved antioxidant enzyme activities in metal-stressed plants. This study indicated that combined use of organo-mineral amendments can effectively reduce the bioavailability and mobility of Pb and Zn in co-contaminated soils. Combined application of organo-mineral amendments could be viable remediation technology for immobilization and metal uptake by plants in polluted soils.

Occurrence and toxicological relevance of pesticides and trace metals in agricultural soils, sediments, and water of the Sogamoso River basin, Colombia.

Historical pesticide use in agriculture and trace metal accumulation have long term impact on soil, sediment, and water quality. This research quantifies legacy and current-use pesticides and trace metals, assessing their occurrence and toxicological implications on a watershed scale in the Sogamoso River basin, tributary of the Magdalena River in Colombia. Organochlorine pesticides (22), organophosphates (7), and azole fungicides (5), as well as trace metals cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn) were analyzed in croplands and along the river. Toxic units (TU) and hazard quotients (HQ) were calculated to assess the mixture toxicity. Organochlorines were detected in 84% of soils, 100% of sediments, and 80% of water samples. Organophosphates were found in 100% of soil and sediment samples, as well as in 70% of water samples. Azole fungicides were present in 79% of soils, 60% of sediments, and in 10% of water samples. Total pesticide concentrations ranged from 214.2 to 8497.7 µg/kg in soils, 569.6-12768.2 µg/kg in sediments, and 0.2-4.1 µg/L in water. In addition, the use of partition coefficient (Kd) and organic carbon fraction (foc) allowed the distribution analysis for most of the pesticides in sediments, suspended particulate matter (SPM), and water systems, but not for soils. Concentrations of trace metals Cu, Zn, Pb, and Zn exceeded international quality guidelines for agricultural soils in 16% of the samples. Furthermore, Cu and Zn concentrations exceeded sediment quality guidelines in 50 and 90% of the samples, respectively. These findings demonstrate the broad distribution of complex mixtures of trace metals, legacy organochlorines, and current-use pesticides across the basin, indicating that conventional agriculture is a significant source of diffuse pollution. Sustainable agricultural practices are needed to mitigate adverse impacts on ecosystems and human health.

Interactions Between Heavy Metal Exposure and Blood Biochemistry in an Urban Population of the Black Swan (Cygnus atratus) in Australia.

There is growing recognition of the threat posed to wildlife by pollutants. Waterbirds are robust bioindicators of ecosystem health, and metal toxicity is a threat to these species in waterways worldwide. Urban waterbirds are likely to be at the highest risk of heavy metal exposure, but this issue has not been widely explored in Australia. Our aim was to estimate contemporary heavy metal exposure in a sedentary urban waterbird population: black swans (Cygnus atratus) inhabiting an inner-city wetland in one of Australia's largest cities, Melbourne. To investigate the physiological implications of legacy heavy metal exposure in these birds, we quantified blood biochemistry profiles and examined their relationships with metal concentrations in feathers. We caught 15 swans in 2021 and took feather samples to measure the concentration of eight heavy metals (chromium (Cr), manganese (Mn), iron (Fe), nickel (Ni), copper (Cu), zinc (Zn), lead (Pb), and mercury (Hg)), and blood samples to measure the concentration of 13 plasma analytes. Multivariate regression analysis revealed few associations between heavy metals and biochemistry markers, and no differences between sexes or age classes. This study presents a baseline dataset of these contaminants and blood biochemical profiles of swans at this wetland that can be used for future monitoring and is an important step toward a better understanding of the threat posed by heavy metals to Australian urban waterbirds.

Pollution indices of selected metals in tea (Camellia sinensis L.) growing soils of the Upper Assam region divulge a non-trifling menace of National Highway.

The study investigated the influence of a National Highway (NH) traversing tea estates (TEs) on heavy metal (HM) contamination in the top soils of Upper Assam, India. The dispersion and accumulation of six HMs, viz. cadmium (Cd), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), and zinc (Zn), within tea-growing soils were assessed using diverse indices: contamination factor (CF), degree of contamination (DC), enrichment factor (EF), geo-accumulation index (Igeo), modified degree of contamination (MDC), Nemerow pollution index (PINemerow), pollution load index (PLI), potential ecological risk factor (Eri), and potential ecological risk index (RI). The order of HM prevalence was Fe > Mn > Zn > Ni > Cu > Cd. Elevated Cd levels near the NH prompted immediate attention, while Cd and Zn showed moderate pollution in CF, EF, and RI. The remaining metals posed minimal individual risk (Eri< 40), resulting in an overall contamination range of "nil to shallow," signifying slight contamination from the studied metals. From MDC values for investigated metals, it was found to be "zero to very low degree of contamination" at all locations except the vicinity of NH. Soil pollution, as determined by PLI, indicated unpolluted soils in both districts, yet PINemerow values indicated slight pollution. The statistical analysis revealed that there is a significant decrease in most of the indices of HM as the distance from NH increases. The application of multivariate statistical techniques namely Principal Component Analysis and Cluster Analysis showed the presence of three distinct homogenous groups of distances based on different indices. This investigation underscores NH-associated anthropogenic effects on TE soil quality due to HM deposition, warranting proactive mitigation measures.

Discrimination of metal contaminant sources in river sediments influenced by mining and smelting activities using stable Pb and Zn isotopes.

To determine the sources and pathways of lead (Pb) and zinc (Zn) in river sediments contaminated with metals from mining and smelting activities, metal concentrations and Pb and Zn isotope ratios were measured in river water and sediment, and potential metal contaminant samples (imported Zn concentrates, smelting wastes, soils around the smelter, mine ores, and riverside tailings). Zn and cadmium (Cd) concentrations in river water and sediment samples were 30- and 11-25-fold higher, respectively, near the smelter than upstream, while a 6-fold increase in sediment Pb concentrations was detected over the same region. Sediment samples near the smelter (207Pb/206Pb = 0.8638 and 208Pb/206Pb = 2.0960) were observed to have a different Pb isotopic composition from upstream of the smelter (207Pb/206Pb = 0.8322 and 208Pb/206Pb = 2.0502), with δ66Zn values increasing from -0.01 to 0.82‰. Analysis of Pb and Zn isotopes and concentrations revealed that dust-contaminated soils were a major Pb source, and baseline sediments were found to be contaminated by regional mining tailings. For Zn in sediments, the main Zn sources were groundwater-derived Zn (δ66Zn = 1.02 ± 0.43‰, n = 4), dust-contaminated soils (δ66Zn = -0.18 ± 0.08‰, n = 3), and tailings-contaminated sediments (δ66Zn = 0.01 ± 0.07‰, n = 10). Endmember mixing model results showed that dust-contaminated soils contributed 78% and 64% of sediment Pb and Zn, respectively, within 2 km of the Zn smelter, decreasing to negligible levels after 47.1 km downstream. Downstream of the smelter, groundwater-derived Zn contributed 54% of sediment Zn, whereas tailings contaminated sediments contributed 70% and 25% of Pb and Zn, respectively.